ISO 19426-7:2021 矿井结构 第7部分：导绳器

标准编号：ISO 19426-7:2021

中文名称：矿井结构 第7部分：导绳器

英文名称：Structures for mine shafts — Part 7: Rope guides

发布日期：2021-05

标准范围

本文件规定了永久性作业垂直矿井中用于引导运输和防止碰撞的导绳器和摩擦绳的设计载荷和设计程序。包括人员和材料吊装，以及岩石吊装装置。对输送机的尺寸、提升速度、竖井布局配置或竖井深度没有根本限制。本文件适用于在舞台绳索上运行凿井作业。根据技术、时间和成本因素，在考虑使用导绳器的任何项目可行性阶段进行仔细评估后，选择或不选择用于特定应用的导绳器有很多原因。本文件提供了一些关于使用钢丝绳导向器与刚性导向器相比的优缺点的意见，以及使用钢丝绳导向器时需要考虑的具体设计方面。然而，其主要目的是提供所需的技术信息，以确保竖井的良好工程设计，其中绳索导向吊装是所选的解决方案。本文件不涉及操作安全问题。

This document specifies the design loads and the design procedures for the design of rope guides and rubbing ropes used for guiding conveyances and preventing collisions in vertical mine shafts for permanent operations. It covers personnel and material hoisting, as well as rock hoisting installations. There are no fundamental limitations placed on the size of conveyances, the hoisting speeds, shaft layout configurations, or the shaft depth.This document can be applicable to shaft sinking operations when kibbles run on the stage ropes.There are many reasons, based on technical, timing, and cost factors, why rope guides are selected or not for a particular application, following careful assessment at feasibility stage of any project where rope guides are considered. This document provides some comments regarding the advantages and disadvantages of using rope guides compared to rigid guides, and specific design aspects for consideration when using rope guides. However, it is primarily intended to provide the technical information required to ensure good engineering of shafts where rope guided hoisting is the chosen solution.This document does not cover matters of operational safety.

标准预览图