ISO 21016:2007 办公室家具 桌子和办公桌 测定稳定性、强度和耐用性的试验方法

标准编号：ISO 21016:2007

中文名称：办公室家具 桌子和办公桌 测定稳定性、强度和耐用性的试验方法

英文名称：Office furniture — Tables and desks — Test methods for the determination of stability, strength and durability

发布日期：2007-07

标准范围

ISO 21016:2007规定了用于确定设计用于坐着和/或站立位置的所有类型办公桌（例如工作台、高度可调桌子、会议桌和书桌）的稳定性、强度和耐用性的测试方法。它适用于完全组装好并随时可用的桌子。ISO 21016:2007不包含存储元件的测试方法，这些方法可以在ISO 7170中找到。测试包括对装置的各个部分施加负载、力和速度，模拟正常功能使用以及合理预期会发生的误用。除桌面偏转外，测试旨在评估性能，而不考虑材料、设计/构造或制造工艺。测试结果仅对被测装置/部件有效。这些结果可用于表示生产模型的性能，前提是测试模型代表生产模型。根据ISO 21016:2007进行的测试旨在证明产品在其预期环境中提供满意服务的能力。有必要理解的是，这种测试并不能确保结构故障最终不会因习惯性误用或使用时间过长而发生。针对尚未使用的装置/组件开发了测试。但是，如果有适当的理由，它们可以用于故障调查。ISO 21016:2007仅规定了测试方法。ISO 21016:2007没有规定要求。这些应该在需求文档中指定。如果没有，建议的力和循环包含在ISO 21016:2007中。ISO 21016:2007不包括老化或降解的评估。

ISO 21016:2007 specifies test methods for the determination of the stability, the strength and the durability of all types of office tables designed for use in the seated and/or standing position, e.g. work tables, height-adjustable tables, meeting tables and desks. It applies to tables that are fully assembled and ready for use.ISO 21016:2007 does not contain test methods for storage elements, which can be found in ISO 7170.The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.With the exception of the deflection of table tops, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.The test results are valid only for the unit/component tested. These results can be used to represent the performance of production models provided that the tested model is representative of the production model.Tests carried out according to ISO 21016:2007 are intended to demonstrate the ability of the item to give satisfactory service in its intended environment. It is necessary to understand that such tests do not ensure that structural failure will not eventually occur as a result of habitual misuse or after an excessively long period of service. The tests have been developed for units/components that have not been in use. However, when properly justified, they can be used for fault investigation.ISO 21016:2007 specifies test methods only.ISO 21016:2007 does not specify requirements. These should be specified in a requirements document. If this is not available, suggested forces and cycles are included in ISO 21016:2007.ISO 21016:2007 does not include an assessment of ageing or degradation.

标准预览图