ISO 1701-1:2004 带升降工作台的铣床试验条件 精密度试验 第1部分：水平刀轴铣床

标准编号：ISO 1701-1:2004

中文名称：带升降工作台的铣床试验条件 精密度试验 第1部分：水平刀轴铣床

英文名称：Test conditions for milling machines with table of variable height — Testing of the accuracy — Part 1: Machines with horizontal spindle

发布日期：2004-08

标准范围

ISO 1701-1:2004参照ISO 230-1规定了带可变高度工作台的通用、正常精度水平轴铣床的几何和加工试验。它还规定了与上述试验相对应的适用公差。ISO 1701-1:2004仅涉及机器精度的验证。它不适用于机器运行的测试（振动、异常噪音、部件的粘滑运动等），也不适用于机器特性（如速度、进给等），因为此类检查通常在测试精度之前进行。

ISO 1701-1:2004 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests.ISO 1701-1:2004 deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.), nor to machine characteristics (such as speeds, feeds, etc.), as such checks are generally carried out before testing the accuracy.

标准预览图