ISO 18523-2:2018 建筑物的能效 能源计算用建设区间与空间的时间表和条件 第2部分：住宅建筑

标准编号：ISO 18523-2:2018

中文名称：建筑物的能效 能源计算用建设区间与空间的时间表和条件 第2部分：住宅建筑

英文名称：Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 2: Residential buildings

发布日期：2018-02

标准范围

ISO 18523-2:2018规定了住宅建筑分区和空间使用（称为能源计算输入数据）的时间表和条件的格式。时间表和条件包括占用时间表、技术建筑系统的运行、通风率、热水使用、电器的使用以及由于占用、照明和电器而产生的内部热增益。照明时间表和条件适用于固定安装的照明设备。ISO 18523-2:2018还根据不同的时间表和条件给出了住宅建筑、分区和空间的类别。对于包含任何类别空间或非住宅建筑分区的住宅建筑或其住宅单元，ISO 18523-1适用。根据能源计算所需的分钟数，从时间和空间平均的角度指定了不同级别的计划和条件。计划和条件的值和类别包含在信息中。注:本文件中的时间表和条件与假设基本不同，以便在设计过程中确定技术建筑系统的尺寸，其中假设了可能的最大值或最小值。相反，本文件将讨论建筑能耗计算中假定的最常用值和平均值。

ISO 18523-2:2018 specifies the formats to present the schedule and conditions of zone and space usage (referred to as input data of energy calculations) for residential buildings.The schedule and conditions include schedules of occupancy, operation of technical building systems, ventilation rates, hot water usage, usage of appliances and internal heat gains due to occupancy, lighting and appliances. The schedule and conditions for lighting are applicable to fixed installed lighting fixtures.ISO 18523-2:2018 also gives categories of residential building, zone and space according to differentiating schedule and condition. For residential buildings or its housing units which contain any category of space or zone of non-residential buildings, ISO 18523？1 applies.Depending on necessary minuteness of the energy calculation, different levels of schedule and condition from the view point of time and space averaging are specified.The values and categories for the schedule and condition are included informatively.NOTE The schedule and condition in this document is basically different from assumptions in order to determine the size of technical building systems in the process of design, where possible largest or smallest values are assumed. Instead, most usual and average values, which are assumed for the building energy calculation, are dealt with in this document.

标准预览图