ISO 10524-2:2005 医学气体用气压调整仪 第2部分： 多支管和管线压力调整仪

标准编号：ISO 10524-2:2005

中文名称：医学气体用气压调整仪 第2部分： 多支管和管线压力调整仪

英文名称：Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators

发布日期：2005-05

标准范围

ISO 10524-2:2005规定了在15°C条件下连接至标称充注压力高达25 000 kPa的气瓶的歧管压力调节器和入口压力高达3 000 kPa的管路压力调节器的要求，以及用于以下医用气体管道系统的要求:氧气一氧化二氮；呼吸用空气；二氧化碳氧气/一氧化二氮混合物；用于驱动手术工具的空气；用于驱动手术工具的氮气；氧气浓缩器产生的氧气。ISO 10524-2:2005适用于作为单独装置提供的歧管压力调节器和管路压力调节器，或适用于组件内的相关部件。它不适用于与真空管道系统一起使用的压力调节器。

ISO 10524-2:2005 specifies requirements for manifold pressure regulators intended to be connected to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and for line pressure regulators for inlet pressures up to 3 000 kPa and intended for use in pipeline systems for the following medical gases:oxygen; nitrous oxide; air for breathing; carbon dioxide; oxygen/nitrous oxide mixtures; air for driving surgical tools; nitrogen for driving surgical tools; oxygen produced by an oxygen concentrator.ISO 10524-2:2005 applies to manifold pressure regulators and line pressure regulators supplied as individual units or to the relevant components incorporated within an assembly. It does not apply to pressure regulators for use with vacuum pipeline systems.

标准预览图