ISO/IEC 20117:2004 信息技术-系统间电讯和信息交换-私人综合服务网络-内部-交换信号协议-通信中心监控和邮箱辨别的补充服务

标准编号：ISO/IEC 20117:2004

中文名称：信息技术-系统间电讯和信息交换-私人综合服务网络-内部-交换信号协议-通信中心监控和邮箱辨别的补充服务

英文名称：Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Message centre monitoring and mailbox

发布日期：2004-05

标准范围

ISO/IEC 20117:2004规定了在专用综合业务网络（PISN）内连接在一起的专用综合业务网络交换机（PINX）之间的Q参考点处支持消息中心监控补充业务（SS-MCM）和邮箱标识补充业务（SS-MID）的信令协议。补充业务MCM使被服务用户能够通过消息中心获得有关存储在该被服务用户邮箱中的消息的状态和状态更改的信息。如果服务用户在信息中心内有多个邮箱，补充业务MID使信息中心能够识别服务用户的特定邮箱。此外，SS-MID使服务用户能够在消息中心内的特定邮箱中对自己进行身份验证。ISO/IEC 11579-1中定义了Q参考点。按照ETS 300 387规定的方法，分三个阶段制定服务规范。本国际标准包含Q参考点的第3阶段规范，并满足ISO/IEC 20116中第1阶段和第2阶段规范确定的要求。SS-MCM和SS-MID的信令协议使用ISO/IEC 11582中规定的补充业务控制通用程序的某些方面。ISO/IEC 20117:2004还规定了支持SS之间Q参考点处交互的附加信令协议要求-MCM以及SS-MID和其他补充服务以及ANF。

ISO/IEC 20117:2004 specifies the signalling protocol for the support of the Message Centre Monitoring supplementary service (SS-MCM) as well as the Mailbox Identification supplementary service (SS-MID) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).The supplementary service MCM enables a Served User to get informed by a Message Centre about the status and status changes of messages stored in that Served Users Mailbox.The supplementary service MID enables a Message Centre to identify a specific mailbox of a Served User in case the Served User has more than one mailbox within the Message Centre. In addition SS-MID enables a Served User to authenticate himself/herself at a specific mailbox located within the Messages Centre.The Q reference point is defined in ISO/IEC 11579-1.Service specifications are produced in three stages and according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 20116.The signalling protocol for SS-MCM and SS-MID uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582.ISO/IEC 20117:2004 also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-MCM as well as SS-MID and other supplementary services and ANFs.

标准预览图