ISO 3506-1:2009 耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱

标准编号：ISO 3506-1:2009

中文名称：耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱

英文名称：Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs

发布日期：2009-11

标准范围

ISO 3506-1:20 09规定了由奥氏体、马氏体和铁素体钢级耐腐蚀不锈钢制成的螺栓、螺钉和螺柱在10°C至35°C的环境温度范围内进行测试时的机械性能。在较高或较低的温度下，性能会有所不同。ISO 3506-1:20 09适用于螺栓、螺钉和螺柱-公称螺纹直径d≤39mm，-直径和螺距符合ISO 68-1、ISO 261和ISO 262的三角形ISO公制螺纹，以及-任何形状。它不适用于具有特殊性能的螺钉，如可焊性。

ISO 3506-1:2009 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.ISO 3506-1:2009 applies to bolts, screws and studs- with nominal thread diameter d ≤ 39 mm,- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262, and- of any shape.It does not apply to screws with special properties, such as weldability.

标准预览图