ISO 14373:2024 电阻焊 无涂层和有涂层低碳钢的点焊规程

标准编号：ISO 14373:2024

中文名称：电阻焊 无涂层和有涂层低碳钢的点焊规程

英文名称：Resistance welding — Procedure for spot welding of uncoated and coated low-carbon steels

发布日期：2024-01

标准范围

本文件规定了制造无涂层和金属涂层或可焊接非金属涂层低碳钢组件时电阻点焊的要求，该组件由两片或三片金属板组成，其中待焊接部件的最大单层厚度在0.4？毫米到3.0？嗯。本文件适用于厚度比小于或等于3:1的等厚或不等厚板材的焊接。使用以下类型的设备进行焊接属于本文件的范围:A）？基座焊接设备；b）？便携式焊枪；c）？元件由机器人或自动送料设备送料的自动焊接设备；d）？多点焊机；e）？机器人焊接机。

This document specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic-coated or weldable non-metallic-coated low-carbon steel, comprising two or three sheets of metal, where the maximum single-sheet thickness of components to be welded is within the range 0,4 mm to 3,0 mm.

This document is applicable to welding of sheets of the same or unequal thickness, where the thickness ratio is less than or equal to 3:1.

Welding with the following types of equipment is within the scope of this document:

a)       pedestal welding equipment;

b)       portable welding guns;

c)        automatic welding equipment where the components are fed by robots or automatic feeding equipment;

d)       multi-spot-welding machines;

e)       robotic welding machines.

标准预览图