ISO 3387:2020 橡胶 硬度测量法测定结晶效应

标准编号：ISO 3387:2020

中文名称：橡胶 硬度测量法测定结晶效应

英文名称：Rubber — Determination of crystallization effects by hardness measurements

发布日期：2020-03

标准范围

本文件规定了一种基于硬度测量的试验，用于确定结晶引起的橡胶随时间逐渐变硬。它仅限于在10 IRHD至85 IRHD的试验温度下具有初始硬度的材料。本方法适用于生橡胶、未硫化（复合）橡胶和硫化橡胶。在寒冷气候条件下，如氯丁橡胶和天然橡胶，具有明显结晶倾向的橡胶主要有兴趣。该方法不适用于快速结晶材料，这些材料在试验温度下调节所用的15分钟时间范围内结晶到相当程度。

This document specifies a test based on hardness measurements for determining the progressive stiffening of rubber with time, caused by crystallization. It is limited to materials having an initial hardness at a test temperature of from 10 IRHD to 85 IRHD.The method is applicable to raw, unvulcanized (compounded) and vulcanized rubber. It is mainly of interest for rubber with a marked crystallization tendency at temperatures experienced in cold climates, such as chloroprene and natural rubber.The method is not applicable to fast-crystallizing materials which crystallize to a considerable degree within the timespan of 15 min used for conditioning at test temperature.

标准预览图