ISO 15614-13:2005 金属的材料焊接程序的规范和资格 第13部分：电阻对接和烧化焊接

标准编号：ISO 15614-13:2005

中文名称：金属的材料焊接程序的规范和资格 第13部分：电阻对接和烧化焊接

英文名称：Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Resistance butt and flash welding

发布日期：2005-02

标准范围

ISO 15614-13:2005规定了焊接工艺规范评定应采用的试验。适用于金属材料的电阻对焊和闪光焊，如实心、管状、扁平或圆形截面。ISO 15614-13:2005的基本原则可适用于规范中规定的其他电阻焊工艺。ISO 15614-13:2005定义了ISO 15614-13:2005涵盖的所有实际焊接操作的试验条件和合格焊接工艺的有效性限制。ISO 15614-13:2005涵盖了ISO 4063中定义的以下电阻焊工艺:24.采用直流或交流闪光焊，具有各种动作顺序、持续闪光和脉冲闪光；25电阻对焊，使用直流电或交流电以及各种压力顺序。

ISO 15614-13:2005 specifies the tests which should be used for qualification of welding procedure specifications.It applies to resistance butt welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular cross-section. The basic principles of ISO 15614-13:2005 may be applied to other resistance welding processes when this is specified in the specification.ISO 15614-13:2005 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by ISO 15614-13:2005.ISO 15614-13:2005 covers the following resistance welding processes as defined in ISO 4063:24 flash welding using direct current or alternating current with various movement sequences, constant flashing and pulsed flashing;25 resistance butt welding, using direct current or alternating current with various pressure sequences.

标准预览图