ISO 11606:2022 造船和海上技术 海上电磁罗盘

标准编号：ISO 11606:2022

中文名称：造船和海上技术 海上电磁罗盘

英文名称：Ships and marine technology — Marine electromagnetic compasses

发布日期：2022-02

标准范围

本文件规定了1974年《海上人命安全公约》第五章和《国际高速船安全规范》（HSC规范）要求的用于船舶转向和/或轴承的船用电磁罗盘的一般要求、型式试验和单独试验。根据国际海事组织MSC决议。166（78），本文件适用于2002年7月1日之前安装的船用电磁罗盘。对于2002年7月1日当天或之后安装的船用电磁罗盘，ISO 22090-2适用。本文件中规定的磁罗盘适用于总长通常不小于24？m的船舶。注:在本文件中，从IMO决议建议中提取的要求以斜体印刷。

This document specifies general requirements, type tests and individual tests for the marine electromagnetic compasses, intended for steering purposes and/or taking bearings on board ships, required by Chapter V of SOLAS, 1974 and the International Code of Safety for High-Speed Craft (HSC Code). In accordance with IMO Resolution MSC.166(78), this document is applicable to marine electromagnetic compasses fitted before 1 July 2002. For marine electromagnetic compasses installed on or after 1 July 2002, ISO 22090-2 is applicable. The magnetic compasses specified in this document apply to ships the overall length of which is normally not less than 24 m.NOTE       In this document requirements extracted from the recommendations of IMO resolutions are printed in italics.

标准预览图