ISO 7315:1988 航空航天.流体动力管道安装用的"P”形夹（环状夹）.尺寸

标准编号：ISO 7315:1988

中文名称：航空航天.流体动力管道安装用的"P”形夹（环状夹）.尺寸

英文名称：Aerospace — "P" clamps (loop clamps) for fluid systems — Envelope dimensions

发布日期：1988-02

标准范围

指定通过标称直径为5 mm的螺栓安装的这些夹具的最大和最小尺寸。指定的尺寸定义了尺寸封套。不应被视为互换性标准。每种夹具的公差将在零件标准图纸中定义。

Specifies maximum and minimum dimensions for these clamps installed by means of a bolt with a nominal diameter of 5 mm. The specified dimensions define a dimensional envelope. Shall not be considered as an interchangeability standard. The tolerances for each type of clamp are to be defined in the parts standards drawings.

标准预览图