ISO 15637-1:2002 圆柱研磨套管的固定夹具-第1部分：带柄手工研磨机器的固定夹具

标准编号：ISO 15637-1:2002

中文名称：圆柱研磨套管的固定夹具-第1部分：带柄手工研磨机器的固定夹具

英文名称：Holding fixtures of cylindrical abrasive sleeves — Part 1: Holding fixtures with shank for hand-held grinding machines

发布日期：2002-11

标准范围

根据ISO 2421，ISO 15637-1:2002适用于与直径等于或小于100 mm的圆柱形研磨套筒一起使用的带柄夹具。柄直径等于或小于100 mm的夹持夹具大多具有层状芯，用于手持式磨床。离心力对薄片的影响导致直径增加，从而将研磨套筒夹在夹具上。

ISO 15637-1:2002 applies to holding fixtures with shank for use with cylindrical abrasive sleeves with a diameter equal to or less than 100 mm in accordance with ISO 2421. Holding fixtures with shank having a diameter equal to or less than 100 mm mostly have lamellar cores and are used on hand-held grinding machines. The impact of centrifugal forces on the lamellae result in an increase in diameter and thereby clamp the abrasive sleeve on to the holding fixture.

标准预览图