ISO 12261:1996 航空航天,强度分类小于或等于1100PA的有涂覆或无涂覆.金属材料长长度MJ螺纹.节圆直径轴.内偏肋十字形的或割开用具.平头螺钉尺寸

标准编号：ISO 12261:1996

中文名称：航空航天,强度分类小于或等于1100PA的有涂覆或无涂覆.金属材料长长度MJ螺纹.节圆直径轴.内偏肋十字形的或割开用具.平头螺钉尺寸

英文名称：Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equ

发布日期：1996-10

标准范围

给出了金属材料制、有涂层或无涂层、强度等级小于或等于1100 MPa的带内偏置十字肋或无肋传动、中径杆和长MJ螺纹的盘头螺钉的尺寸。适用于航空航天产品标准的编制。

Gives the dimensions of pan head screws with internal offset cruciform ribbed or unribbed drive, pitch diameter shank and long length MJ threads, in metallic material, coated or uncoated, with strength classes less than or equal to 1 100 MPa. Applicable to the compilation of aerospace product standards.

标准预览图