ISO/IEC 7811-1:2018 识别卡 记录技术 第1部分：压印

标准编号：ISO/IEC 7811-1:2018

中文名称：识别卡 记录技术 第1部分：压印

英文名称：Identification cards — Recording technique — Part 1: Embossing

发布日期：2018-08

标准范围

ISO/IEC 7811-1:20 18本文件是描述术语和定义条款中定义的识别卡参数以及此类卡在国际交换中的使用的一系列国际标准之一。本文件规定了身份证上浮雕字符的要求。压花字符旨在通过使用打印机或通过视觉或机器读取来传输数据。它考虑了人和机器两个方面，并规定了最低要求。本文件的目的是提供卡的性能标准。本文档中未考虑卡在测试前的使用量（如果有）。不符合规定标准的情况由相关各方协商。ISO/IEC 10373？1规定了用于根据本文档中规定的参数检查卡的测试程序。注1本文件中SI和/或英制测量系统中的数值可能已四舍五入，并且彼此一致，但不完全相等。使用任何一种系统都是正确的，但是混合或重新转换值可能会导致错误。最初的设计是使用英制测量系统进行的。注2 ISO/IEC 7811定义的触觉识别标记（TIM）？9可以位于本文档的名称和地址区域。该区域的浮雕字符布局无意干扰TIM。

ISO/IEC 7811-1:2018 This document is one of a series of International Standards describing the parameters for identification cards as defined in the terms and definitions clause and the use of such cards for international interchange.
This document specifies requirements for embossed characters on identification cards. The embossed characters are intended for transfer of data either by use of imprinters or by visual or machine reading. It takes into consideration both human and machine aspects and states minimum requirements.
It is the purpose of this document to provide criteria to which cards shall perform. No consideration is given within this document to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria is negotiated between the involved parties.
ISO/IEC 10373？1 specifies the test procedures used to check cards against the parameters specified in this document.
NOTE 1 Numeric values in the SI and/or Imperial measurement system in this document may have been rounded off and are consistent with, but not exactly equal to each other. Using either system is correct but intermixing or reconverting values can result in errors. The original design was made using the Imperial measurement system.
NOTE 2 Tactile Identifier Mark (TIM) defined by ISO/IEC 7811？9 can be located in the name and address area of this document. The layout of embossed characters in this area is not intended to interfere with TIM.

标准预览图