ISO 19085-2:2017 木工机械 安全 第2部分：水平梁板圆锯机

标准编号：ISO 19085-2:2017

中文名称：木工机械 安全 第2部分：水平梁板圆锯机

英文名称：Woodworking machines — Safety — Part 2: Horizontal beam panel circular sawing machines

发布日期：2017-07

标准范围

ISO 19085-2:2017给出了水平梁板式圆锯机的安全要求和措施，其前切割线的锯架安装在工件支架下方，手动和/或电动加载和手动卸载，以下称为“机器”。ISO 19085-2:2017涉及第4条所列的与机器相关的所有重大危险、危险情况和事件，包括在制造商预期的条件下操作、调整和维护时，包括合理可预见的误用。此外，还考虑了运输、组装、拆卸、禁用和报废阶段。注:有关相关但不显著的危险，例如机架的锐边，请参见ISO 12100:2010ISO 19085-2:2017也适用于装有以下一个或多个装置/附加工作装置的机器，其危险已得到处理:-侧压装置；-动力卸载装置；-评分单位；-后成型/软成型边缘预切割装置；-面板翻转装置；-正面转盘；-推出装置；-锯条的气动夹紧；-电动面板加载装置；-用铣刀开槽的装置；-机器内部的一条或多条附加切割线，用于纵向和/或头部切割（在横向切割线之前）；-工件真空夹紧，作为正面转台或面板加载装置的一部分。这些机器设计用于切割由以下部件组成的面板:a） 实木，b） 与木材具有相似物理特性的材料（见ISO 19085-1:2017, 3.2),c） 石膏板，石膏纤维板，d） 由上述材料制成的复合板，以及e） 芯部由聚氨酯或矿物材料等组成的复合材料，用轻合金层压。ISO 19085-2:2017不涉及与-与上面虚线列表不同的特定功能，-使用铣削工具加工面板以进行开槽，-面板的电动卸载，-前切割线上分体式压力梁的后半部分，-一台机器与任何其他机器的组合（作为一条生产线的一部分）。ISO 19085-2:2017不适用于在潜在爆炸性环境中使用的机器或在其发布日期之前制造的机器。

ISO 19085-2:2017 gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually and/or powered loaded and manually unloaded, hereinafter referred to as "machines".ISO 19085-2:2017 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.NOTE For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.ISO 19085-2:2017 is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:- side pressure device;- device for powered unloading;- unit for scoring;- unit for post-formed/soft-formed edge pre-cutting;- panel turning device;- front side turn table;- pushing out device;- pneumatic clamping of the saw blade;- powered panel loading device;- device for grooving by milling tool;- one or more additional cutting lines inside the machine for longitudinal and/or head cut (before the transversal cutting line);- work-piece vacuum clamping as part of a front side turn table or of a panel loading device.The machines are designed for cutting panels consisting ofa) solid wood,b) material with similar physical characteristics to wood (see ISO 19085？1:2017, 3.2),c) gypsum boards, gypsum bounded fibreboards,d) composite boards made from the materials listed above, ande) composite materials with core consisting of e.g. polyurethane or mineral material laminated with light alloy.ISO 19085-2:2017 does not deal with hazards related to- specific features that differ from the dashed list above,- the machining of panels with milling tools for grooving,- powered unloading of panels,- rear half of split pressure beam on the front cutting line,- the combination of a single machine being used with any other machine (as part of a line).ISO 19085-2:2017 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

标准预览图