ISO 4101:1983 起重机用钢丝绳的拉制钢丝.规范

标准编号：ISO 4101:1983

中文名称：起重机用钢丝绳的拉制钢丝.规范

英文名称：Drawn steel wire for elevator ropes — Specifications

发布日期：1983-09

标准范围

给出了仅用于电梯钢丝绳的钢丝的规格（关于直径、椭圆度、抗拉强度、试验、验收条件）。适用于直径在0.25至1.8 mnm之间的新钢丝，仅用于制造电梯钢丝绳。不适用于从绳索上取下的钢丝。

Gives specifications (concerning diameter, ovality, tensile strength, tests, acceptance conditions) for steel wire to be used for elevator ropes only. Applies to new steel wire of between 0,25 and 1,8 mnm diameter, used solely for manufacture of elevator ropes. Does not apply to steel wires taken from a rope.

标准预览图