ISO 4254-1:2008 农业机械 安全 第1部分：一般要求

标准编号：ISO 4254-1:2008

中文名称：农业机械 安全 第1部分：一般要求

英文名称：Agricultural machinery — Safety — Part 1: General requirements

发布日期：2008-04

标准范围

ISO 4254-1:2008规定了用于农业的自行式骑乘机械和安装式、半安装式或牵引式机械的设计和建造的一般安全要求及其验证。此外，它还规定了制造商提供的安全工作实践（包括剩余风险）信息的类型。ISO 4254-1:2008规定了与按照预期和制造商预见的条件使用的农业机械相关的重大危险（如附录A所列）、危险情况和事件（见第4条）。ISO 4254-1:2008不适用于拖拉机、飞机、气垫车或草坪和花园设备。ISO 4254-1:2008不适用于环境危害、道路安全、电磁兼容性或动力输出（PTO）驱动轴；除防护装置和屏障的强度要求（见4.7）外，它不适用于动力传输的运动部件，也不适用于除声明外的振动。不适用于由专业服务人员进行的维护或维修相关的危险。ISO 4254-1:2008不适用于出版日期之前制造的机器。ISO 4254-1:2008处理的所有危险不一定存在于特定机器上。对于ISO 4254-1:2008涵盖的任何机器，直接适用于该类型机器的ISO 4254部分的规定（如有）优先于ISO 4254-1:2008的规定。

ISO 4254-1:2008 specifies the general safety requirements and their verification for the design and construction of self-propelled ride-on machines and mounted, semi-mounted or trailed machines used in agriculture. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.ISO 4254-1:2008 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to this agricultural machinery used as intended and under the conditions foreseen by the manufacturer (see Clause 4).ISO 4254-1:2008 is not applicable to tractors, aircraft, air-cushion vehicles, or lawn and garden equipment.ISO 4254-1:2008 is not applicable to environmental hazards, road safety, electromagnetic compatibility, or to the power take-off (PTO) drive shaft; neither is it applicable to moving parts for power transmission except for strength requirements for guards and barriers (see 4.7), nor to vibration except in respect of declarations. It is not applicable to hazards related to maintenance or repairs to be carried out by professional service personnel.ISO 4254-1:2008 is not applicable to machines which are manufactured before the date of its publication.All of the hazards dealt with by ISO 4254-1:2008 will not necessarily be present on a particular machine. For any machine covered by ISO 4254-1:2008, the provisions of the part of ISO 4254 directly applicable to that type of machine, if available, take precedence over the provisions of ISO 4254-1:2008.

标准预览图