ISO 8130-10:2021 涂料粉末 第10部分：附着力的测定

标准编号：ISO 8130-10:2021

中文名称：涂料粉末 第10部分：附着力的测定

英文名称：Coating powders — Part 10: Determination of deposition efficiency

发布日期：2021-06

标准范围

本文件规定了在已知喷枪和环境条件下，测定沉积在试验项目上的喷涂粉末质量分数的方法，单位为%。该方法适用于通过电晕或摩擦充电施加的粉末，并可用于比较使用相同粉末的相同或不同枪的不同粉末的沉积效率。由于环境和设备的影响可能会随着时间和地点的不同而发生显著变化，因此该方法仅在连续评估粉末或枪时用于比较。

This document specifies a method for determining the mass fraction in per cent (%) of a sprayed coating powder which is deposited on a test item under known spray gun and environmental conditions.The method is applicable to powders applied by corona or tribo charging and can be used to compare the deposition efficiency of different powders with the same or different gun with the same powder.This method is only used for comparison when powders or guns are evaluated consecutively, as the influence of the environment and the equipment can vary significantly with time and location.

标准预览图