ISO 23233:2009 硫化橡胶或热塑性橡胶 动力垂直研磨盘测定耐磨性

标准编号：ISO 23233:2009

中文名称：硫化橡胶或热塑性橡胶 动力垂直研磨盘测定耐磨性

英文名称：Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc

发布日期：2009-02

标准范围

ISO 23233:2009规定了使用驱动垂直研磨盘（LAT 100:实验室磨损试验机100）测定橡胶耐磨性的方法。磨损时的质量损失是通过在车轮形橡胶试件和研磨盘之间设置不同的滑动角和旋转速度而产生的滑动来确定的，研磨盘在彼此成直角的平面内旋转，并以规定的载荷相互挤压。测试结果可以报告为每单位运行距离的质量损失和/或与参考化合物相比的耐磨性指数。本国际标准适用于比较测试、质量控制、规范符合性测试、仲裁测试和研发工作。由于所描述的测试装置能够独立地设置每个磨损参数，例如滑动角、研磨盘的转速和负载，因此该方法适合于对各种橡胶制品，特别是轮胎进行广泛的磨损测试。

ISO 23233:2009 specifies a method for the determination of the resistance of rubber to abrasion using a driven, vertical abrasive disc (the LAT 100: Laboratory Abrasion Tester 100).The loss in mass on abrasion is determined through the slip caused by setting different slip angles and rotational speeds between a wheel-shaped rubber test piece and an abrasive disc, rotating in planes at right angles to each other and pressed against each other with a specified load. The test result can be reported as the loss in mass per unit running distance and/or as an abrasion resistance index compared to a reference compound.This International Standard is applicable to comparative testing, quality control, specification compliance testing, referee testing and research and development work.As the test device described is capable of setting each abrasion parameter, such as slip angle, rotational speed of the abrasive disc and load, independently, the method is suitable for carrying out a wide range of abrasion tests for various rubber products, especially tyres.

标准预览图