ISO 16063-33:2017 振动与冲击传感器校准方法 第33部分：磁场灵敏度的测试
标准编号：ISO 16063-33:2017
中文名称：振动与冲击传感器校准方法 第33部分：磁场灵敏度的测试
英文名称：Methods for the calibration of vibration and shock transducers — Part 33: Testing of magnetic field sensitivity
发布日期：2017-10
标准范围
ISO 16063-33:2017规定了用于测试振动和冲击传感器磁场灵敏度的设备的方法、程序和规范。它适用于各种振动和冲击传感器。ISO 16063-33:2017适用于均方根（r.m.s.）值大于10的参考测试正弦磁场？在50赫兹或60赫兹下为3 T。通常，测试磁场为10？使用50Hz或60Hz下的2T。ISO 16063-33:2017主要面向那些需要满足实验室条件下磁场灵敏度测量国际标准化方法的人。注1 T（特斯拉）=1 Wb/m2。
ISO 16063-33:2017 specifies a method, procedures and the specifications for an apparatus to be used for testing the magnetic field sensitivity of vibration and shock transducers. It is applicable to all kinds of vibration and shock transducers.ISO 16063-33:2017 is applicable for a reference test sinusoidal magnetic field having a root mean square (r.m.s.) value more than 10?3 T at 50 Hz or 60 Hz. Typically, a test magnetic field of 10?2 T at 50 Hz or 60 Hz is used.ISO 16063-33:2017 is primarily intended for those who are required to meet internationally standardized methods for the measurement of magnetic field sensitivity under laboratory conditions.NOTE 1 T (tesla) = 1 Wb/m2.
标准预览图
