ISO/IEC 23004-7:2008 信息技术 多媒体中间设备 第7部分：系统完整性管理

标准编号：ISO/IEC 23004-7:2008

中文名称：信息技术 多媒体中间设备 第7部分：系统完整性管理

英文名称：Information technology — Multimedia Middleware — Part 7: System integrity management

发布日期：2008-02

标准范围

ISO/IEC 23004-7:20 08规定了MPEG多媒体中间件（M3W）中用于完整性管理的支持应用程序编程接口（API）的接口和实现技术。完整性管理是M3W平台的可选框架。目标是有控制的升级和扩展。基本上，这意味着减少在升级/扩展期间破坏系统的机会，并在出现问题时提供恢复一致配置的能力。ISO/IEC 23004-7:20 08规定了以下内容的实体和接口。监控:这基本上是提取描述终端软件和硬件配置的模型（自我模型）。诊断:基于自我模型框架，这将需要确定配置中是否存在故障。修复:在诊断过程中发现的故障需要在可能的情况下使用M3W提供的升级和扩展设施进行修复。

ISO/IEC 23004-7:2008 specifies the interfaces of the support application programming interface (API) and the realization technology used for Integrity Management in MPEG Multimedia Middleware (M3W). Integrity Management is an optional framework for M3W Platforms. The goal is to have controlled upgrading and extension. Basically this means reducing the chance of breaking the system during an upgrade/extension and giving the ability to restore a consistent configuration when things have gone wrong.

ISO/IEC 23004-7:2008 specifies entities and interfaces for the following.

• Monitoring: This is basically extraction of the model that describes the software and hardware configuration of the terminal (self model).


• Diagnosis: Based on the self model framework, this will need to determine whether there is a fault in the configuration.


• Repair: The faults that have been identified during diagnosis will need to be removed when this is possible using the facilities for upgrading and extension offered by M3W.

标准预览图