ISO 2929:2002 燃料卡车卸料用橡胶软管规范

标准编号：ISO 2929:2002

中文名称：燃料卡车卸料用橡胶软管规范

英文名称：Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification

发布日期：2002-10

标准范围

ISO 2929:2002规定了两组橡胶软管和橡胶软管组件的要求，用于装载和卸载最大工作压力为10巴（1.0兆帕）的液态烃燃料。两组软管均设计用于:与芳香烃含量不超过50体积%且含有至多15%含氧化合物的烃燃料一起使用；在-30°C至+70°C的温度范围内运行，在静态条件下储存时不会因-50°C至+70°C的气候条件而损坏。ISO 2929:2002不适用于液化石油气系统、航空燃油系统、加油站系统或船舶应用的软管和软管组件。

ISO 2929:2002 specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 10 bar (1,0 MPa).Both groups of hoses are designed for:

1. use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds;
2. operation within the temperature range of -30 °C to +70 °C, undamaged by climatic conditions of -50 °C to +70 °C when stored in static conditions.

ISO 2929:2002 is not applicable to hoses and hose assemblies for LPG systems, aviation fuel systems, fuel station systems or marine applications.

标准预览图