ISO 6334:2023 建筑设备和工业装置用隔热产品 膨胀珍珠岩产品 规范

标准编号：ISO 6334:2023

中文名称：建筑设备和工业装置用隔热产品 膨胀珍珠岩产品 规范

英文名称：Thermal insulation products for building equipment and industrial installations — Expanded perlite products — Specification

发布日期：2023-12

标准范围

本文件规定了工厂制造的膨胀珍珠岩产品的要求，这些产品用于工作温度为23？°C到~？1？000？°C。产品以板材、管段、分段、预制构件和特殊构件的形式制造。本文件描述了产品特性，包括测试、合格评定、标记和标签的程序。本文件涵盖的产品也用于预制隔热系统和复合板；不包括包含这些产品的系统的结构性能。本文件没有规定产品为了证明其在特定应用中的适用性而需要达到的给定性能的所需水平或类别。给定应用所需的级别可以在法规和招标邀请书中找到。本文件不适用于:A）？申报热导率大于0的产品？072？W/(m？K)70岁？°C；b）？拟用于建筑结构隔热的产品；c）？声学方面1)？直接空气传播隔音，以及2)？冲击噪声传递指数。

This document specifies the requirements for factory-made expanded perlite products which are used for thermal insulation of industrial installations and building equipment with an operating temperature from 23 °C to ~ 1 000 °C.

The products are manufactured in the form of boards, pipe sections, segments, prefabricated ware and special ware.

This document describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

Products covered by this document are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered.

This document does not specify the required level or class of a given property required to be achieved by a product in order to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.

This document is not applicable to:

a)       products with a declared thermal conductivity greater than 0 072 W/(m？K) at 70 °C;

b)       products intended to be used for the insulation of the building structure;

c)        the acoustical aspects

1)       direct airborne sound insulation, and

2)       impact noise transmission index.

标准预览图