ISO 23062:2022 铸造机械 成型和制芯机械及相关设备的安全要求

标准编号：ISO 23062:2022

中文名称：铸造机械 成型和制芯机械及相关设备的安全要求

英文名称：Foundry machinery — Safety requirements for molding and coremaking machinery and associated equipment

发布日期：2022-07

标准范围

本文件涉及与成型和制芯机械及相关设备有关的可预见的重大危险、危险情况和事件，当按预期使用时，以及在制造商可合理预见的误用情况下（见第5条）。它规定了制造商应满足的要求，以确保生命周期阶段内人员和财产的安全，符合ISO12100:2010，5.4，以及设备中可能发生的可预见故障或故障。本文件适用于以下设备:a） 用于调节和/或回收铸造用砂以制模和制芯的机械（包括相关的可模塑颗粒材料）；b） 成型机械；c） 制芯机械；d） 敲出设备；e） 其他直接相关设备。本文件不适用于:—？钢包和浇注设备；注意该设备在欧洲联盟（EU）范围内由EN1247:2010.—？蜡和消失模生产及除蜡设备；—？增材制造设备；—？粉尘和/或气体减排设备；—？起重机装置；—？绞车；—？可作为本文件所涵盖设备组成部分的连续输送机或搬运系统；—？砂和铸件分离系统。本文件未明确涉及电气危险。IEC是否涵盖了这些危险60204-1: 2016

This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 5). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases in accordance with ISO 12100:2010, 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.This document applies to the following equipment:a) machinery constructed to condition and/or reclaim foundry sands for mold and coremaking (including related moldable granular materials);b) molding machinery;c) coremaking machinery;d) knock-out equipment;e) other directly associated equipment.This document does not apply to:—    ladles and pouring equipment;NOTE          This equipment is covered within the European Union (EU) by EN 1247:2010.—    wax and lost foam pattern production and wax removal equipment;—    additive manufacturing equipment;—    dust and/or gaseous emissions reduction equipment;—    crane installations;—    winches;—    continuous conveyors or handling systems which can be an integral part of the equipment covered by this document;—    sand and casting separation systems.This document does not explicitly deal with electrical hazards. These hazards are covered by IEC 60204-1: 2016

标准预览图