ISO 12164-2:2023 带有法兰接触面的空心圆锥接口 第2部分：A、AB、C、CB和EB型空心锥柄用A、C和E型安装孔

标准编号：ISO 12164-2:2023

中文名称：带有法兰接触面的空心圆锥接口 第2部分：A、AB、C、CB和EB型空心锥柄用A、C和E型安装孔

英文名称：Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB

发布日期：2023-10

标准范围

本文件根据ISO 12164-1规定了适用于机床（例如车削、钻孔、铣削、磨削及其组合）的空心锥形柄（HSK）的锥形和法兰接触面接收器的尺寸。本文档规定了三种类型的接收器:-用于自动换刀的A型；-C型仅用于手动换刀，经由接收器和刀柄两者中的径向孔；-E型自动换刀。注1 A、C和E型接收器适合A、AB、C、CB和EB型HSK柄（根据ISO 12164-1）。注2 A、AB和EB型HSK柄也可以手动更换。

This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) in accordance with ISO 12164-1 to be applied on machine tools (e.g. for turning, drilling, milling, grinding and combinations of them).

This document specifies three types of receivers:

—     type A for automatic tool change;

—     type C for manual tool change only, via radial holes in both the receiver and the tool shank;

—     type E for automatic tool change.

NOTE 1        The receivers of types A, C and E fit the HSK shanks of types A, AB, C, CB and EB (according to ISO 12164-1).

NOTE 2        HSK shanks of types A, AB and EB can also be changed manually.

标准预览图