ISO 4927:2005 道路车辆-采用非石油基液压制动液（最大工作温度120℃）的鼓式液压气缸用弹性保护罩

标准编号：ISO 4927:2005

中文名称：道路车辆-采用非石油基液压制动液（最大工作温度120℃）的鼓式液压气缸用弹性保护罩

英文名称：Road vehicles — Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

发布日期：2005-06

标准范围

ISO 4927:2005规定了用于鼓式车轮制动缸端盖的模制橡胶防尘套的性能试验。这些防尘套可防止灰尘和湿气进入，这些灰尘和湿气可能会导致腐蚀，否则会影响车轮制动器的操作。ISO 4927:2005适用于普通护套和加强件插入式护套，用于使用符合ISO 4925的流体安装在轮缸中。不包括与橡胶化合物的化学成分、抗拉强度或制动伸长率有关的要求；它不包括橡胶与插入式钢筋的粘合强度。这些靴子中使用的橡胶材料应适合在-40°C至+120°C的温度范围内工作。

ISO 4927:2005 specifies performance tests for moulded rubber boots used at end closures on drum type wheel brake cylinders. These boots prevent the entrance of dirt and moisture which could cause corrosion and otherwise impair wheel brake operation.ISO 4927:2005 is applicable to boots of both plain and reinforcement insert types, for fitting in wheel cylinders using a fluid in accordance with ISO 4925. It does not include requirements relating to chemical composition, tensile strength or elongation at brake of the rubber compound; it does not cover the strength of adhesion of rubber to the reinforcement in the insert type.The rubber material used in these boots shall be suitable for operation in a temperature range of -40 °C to +120 °C.

标准预览图