ISO 6185-4:2011 充气艇 第4部分：发动机额定功率为15kW及以上、船身长度在8-24m的艇
标准编号：ISO 6185-4:2011
中文名称：充气艇 第4部分：发动机额定功率为15kW及以上、船身长度在8-24m的艇
英文名称：Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
发布日期：2011-07
标准范围
ISO 6185-4:20 11规定了船体长度在8米至24米之间、电机额定功率在15 kW及以上的刚性充气船（RIBs）的设计、材料、制造和测试所需的最低安全特性。它适用于预期在-20°C至+60°C工作温度范围内使用的IX型和X型肋。IX型:机动船，装有至少覆盖左舷和右舷85%的浮力管，适合在近岸和遮蔽水域航行，风力可达6级波弗特，显著波高可达2米（设计类别C和D），船体长度在8米至24米之间，电机额定功率为15千瓦或以上。X型:机动船，装有至少覆盖左舷和右舷85%的浮力管，适合在风力达8级波弗特、显著波高达4米（设计类别B）的水域航行，船体长度在8米之间和24米，电机额定功率为75千瓦及以上。它排除了单室船，浮力小于1 800 N的船只，以及由充气浮力超过12 kN的无支撑材料制成并由功率超过4.5 kW的电机驱动的船只。它不适用于水上玩具，也不适用于ISO 9650规定的充气救生筏。
ISO 6185-4:2011 specifies the minimum safety characteristics required for the design, materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.It is applicable to Types IX and X of RIBs intended for use within the operating temperatures of -20 °C to +60 °C.
- Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufort and significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater.
- Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m (design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kW and greater.
- single-chamber boats,
- boats of less than 1 800 N buoyancy, and
- boats made from unsupported materials of more than 12 kN inflated buoyancy and powered by motors of power exceeding 4,5 kW.
标准预览图
