ISO 12917-1:2002 石油和液体石油产品-水平圆柱罐刻度-第1部分：手工方法

标准编号：ISO 12917-1:2002

中文名称：石油和液体石油产品-水平圆柱罐刻度-第1部分：手工方法

英文名称：Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 1: Manual methods

发布日期：2002-07

标准范围

ISO 12917-1规定了安装在固定位置的标称水平圆柱形储罐的手动校准方法。适用于直径不超过4米、长度不超过30米的卧式储罐。这些方法适用于地面或地下的绝缘和非绝缘储罐。该方法适用于带压储罐，也适用于转向节碟形端和平端圆柱形储罐，以及椭圆形和球形封头储罐。ISO 12917-1适用于从水平面倾斜10%的储罐，前提是对测量的倾斜进行校正

ISO 12917-1 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length.The methods are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pressurized tanks, and to both knuckle-dish-end and flat-end cylindrical tanks as well as elliptical and spherical head tanks.ISO 12917-1 is applicable to tanks inclined by up to 10 % from the horizontal, provided a correction is applied for the measured tilt

标准预览图