ISO/IEC TR 18047-2:2006 信息技术-无线电频率监测装置一致性试验方法-第2部分：135 kHz以下空气界面通信用试验方法
标准编号：ISO/IEC TR 18047-2:2006
中文名称：信息技术-无线电频率监测装置一致性试验方法-第2部分：135 kHz以下空气界面通信用试验方法
英文名称：Information technology — Radio frequency identification device conformance test methods — Part 2: Test methods for air interface communications below 135 kHz
发布日期：2006-06
标准范围
ISO/IEC 18000定义了物品管理应用中使用的射频识别（RFID）设备的空中接口。ISO/IEC 18000-2定义了这些工作频率低于135 kHz的设备的空中接口。ISO/IEC TR 18047的目的是提供符合ISO/IEC 18000各个部分的测试方法。ISO/IEC TR 18047的每个部分都包含了为确定产品是否符合ISO/IEC 18000的相应部分而需要对产品进行的所有测量。对于ISO/IEC TR 18047-2:20 06，每个询问器需要使用A型（FDX）和B型（HDX）标签进行评估，而每个标签需要使用A型（FDX）或B型（HDX）进行评估。应当注意，ISO/IEC TR 18046涵盖了标签和询问器性能的测量。ISO/IEC TR 18047-2:20 06定义了用于确定物品管理的射频识别设备（标签和询问器）是否符合ISO/IEC 18000-2中给出的规范的测试方法，但不适用于符合法规或类似要求的测试。测试方法仅要求验证强制功能和实现的任何可选功能。在适当的情况下，这可以由在一般情况下不可用的另外的应用特定功能标准来补充。ISO/IEC TR 18047-2:20 06中的询问器和标签符合性参数如下:特定模式的一致性参数，包括标称值和公差；直接影响系统功能和交互的参数-可操作性。ISO/IEC TR 18047-2:20 06中未包括以下内容:已包含在法规测试要求中的参数；高级数据编码一致性测试参数（ISO/IEC 15962中规定）。除非另有规定，ISO/IEC TR 18047-2:20 06本部分中的测试仅适用于ISO/IEC 18000-2中定义的RFID标签和询问器。ISO/IEC TR 18047-2:20 06还描述了所有必要的一致性测试。
ISO/IEC 18000 defines the air interfaces for radio frequency identification (RFID) devices used in item management applications. ISO/IEC 18000-2 defines the air interface for these devices operating in frequencies below 135 kHz.The purpose of ISO/IEC TR 18047 is to provide test methods for conformance with the various parts of ISO/IEC 18000.Each part of ISO/IEC TR 18047 contains all measurements required to be made on a product in order to establish whether it conforms with the corresponding part of ISO/IEC 18000. For ISO/IEC TR 18047-2:2006, each interrogator needs to be assessed with tags of both type A (FDX) and type B (HDX), while each tag needs to be assessed either with type A (FDX) or type B (HDX).It should be noted that measurement of tag and interrogator performance is covered by ISO/IEC TR 18046. ISO/IEC TR 18047-2:2006 defines test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in ISO/IEC 18000-2, but does not apply to the testing of conformity with regulatory or similar requirements.The test methods require only that the mandatory functions, and any optional functions which are implemented, be verified. This may, in appropriate circumstances, be supplemented by further, application-specific functionality criteria that are not available in the general case.The interrogator and tag conformance parameters in ISO/IEC TR 18047-2:2006 are the following:
- mode-specific conformance parameters including nominal values and tolerances;
- parameters that apply directly affecting system functionality and inter-operability.
- parameters that are already included in regulatory test requirements;
- high-level data encoding conformance test parameters (these are specified in ISO/IEC 15962).
标准预览图
