ISO 10524-1:2006 医用气体设备用的压力调节器.第1部分：压力调节器和带流量计的压力调节器

标准编号：ISO 10524-1:2006

中文名称：医用气体设备用的压力调节器.第1部分：压力调节器和带流量计的压力调节器

英文名称：Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices

发布日期：2006-02

标准范围

ISO 10524-1:20 06适用于列出的压力调节器类型，旨在用于在患者的治疗、管理、诊断评估和护理中施用以下医用气体:氧气；一氧化二氮；呼吸用空气；氦；二氧化碳；氙；上述气体的混合物；用于驱动手术工具的空气；用于驱动手术工具的氮气。这些压力调节器旨在安装在标称填充压力高达25 000 kPa、在15℃下的钢瓶上，并且可以配备控制和测量输送的医用气体流量的装置。ISO 10524-1:20 06涵盖的压力调节器类型如下:旨在由操作员连接到气缸的压力调节器；带有集成流量计量装置的压力调节器，旨在由操作员连接到气缸；作为医疗设备（如麻醉工作站、肺呼吸机、复苏器）组成部分的压力调节器。

ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:

• oxygen;
• nitrous oxide;
• air for breathing;
• helium;
• carbon dioxide;
• xenon;
• mixtures of the gases listed above;
• air for driving surgical tools;
• nitrogen for driving surgical tools.

These pressure regulators are intended to be fitted to cylinders with nominal filling pressures up to 25 000 kPa at 15 °C and can be provided with devices which control and measure the flow of the medical gas delivered.The types of pressure regulators covered by ISO 10524-1:2006 are as follows:

• pressure regulators intended to be connected to cylinders by the operator;
• pressure regulators with integral flow-metering devices intended to be connected to cylinders by the operator;
• pressure regulators that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators).

标准预览图