ISO 18172-1:2007 气瓶 适于再装的焊接不锈钢瓶 第1部分：不高于6MPa的实验压力

标准编号：ISO 18172-1:2007

中文名称：气瓶 适于再装的焊接不锈钢瓶 第1部分：不高于6MPa的实验压力

英文名称：Gas cylinders — Refillable welded stainless steel cylinders — Part 1: Test pressure 6 MPa and below

发布日期：2007-03

标准范围

ISO 18172-1:2007规定了压缩气体、液化气体和溶解气体的水容量为0.5升至500升（含500升）的可再填充可运输焊接不锈钢气瓶的材料、设计、施工和工艺、制造工艺和试验的最低要求。ISO 18172-1:2007仅适用于试验压力高达6 MPa（60巴）的不锈钢制造的气瓶。如果需要，可根据ISO 18172制造和认证水容量大于150 l且小于等于500 l的可运输大型气瓶-1:2007，前提是提供了装卸设施。

ISO 18172-1:2007 specifies minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded stainless steel gas cylinders, of water capacities from 0,5 l up to and including 500 l, for compressed, liquefied and dissolved gases. ISO 18172-1:2007 is applicable only to cylinders manufactured from stainless steels with test pressures up to 6 MPa (60 bar).If required, transportable large cylinders of water capacity above 150 l and up to 500 l may be manufactured and certified to ISO 18172-1:2007, providing that handling facilities are provided.

标准预览图