ISO 4586-1:2004 装饰用高压层压制件 热固性树脂板 第1部分：分类和规范
标准编号：ISO 4586-1:2004
中文名称：装饰用高压层压制件 热固性树脂板 第1部分：分类和规范
英文名称：High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
发布日期：2004-11
标准范围
ISO 4586-1:20 04根据高压装饰层压板的性能和主要推荐应用领域建立了高压装饰层压板的分类系统，包括具有特殊特性的材料，例如后成型性或对火的明确反应。它还规定了该分类所涵盖的各种类型层压板的性能要求。这些材料的特点是其装饰表面相对坚硬，耐磨损、耐刮擦、耐冲击、耐沸水、耐家用污渍和适中的热量。它们旨在用于内部应用，如下所示:通常小于2mm厚的薄单面层压板，用于粘合到基底上；厚度约2mm至5mm的单面或双面紧凑层压板，其需要刚性支撑而不必粘合到基底上；紧凑型层压板，自支撑，双面，通常厚度大于5毫米，其厚度将根据应用和面板尺寸进行选择。
ISO 4586-1:2004 establishes a classification system for high-pressure decorative laminated sheets according to their performance and main recommended fields of application, including materials with special characteristics, for example postformability or defined reaction to fire.It also specifies requirements on the properties of the various types of laminate covered by this classification. These materials are characterized by their decorative surfaces, which are relatively hard and resistant to wear, scratching, impact, boiling water, domestic stains and moderate heat. They are intended for interior applications as follows:
- thin single-faced laminates usually less than 2 mm thick, for bonding to a substrate;
- compact laminates, single- or double-faced, approximately 2 mm to 5 mm thick, which need to be rigidly supported without necessarily being bonded to a substrate;
- compact laminates, self-supporting, double-faced, usually thicker than 5 mm, the thickness of which will be selected according to application and panel dimensions.
标准预览图
