ISO 10333-5:2001 个人防跌落系统 第5部分：带有自动关闭和自动锁门的连接器

标准编号：ISO 10333-5:2001

中文名称：个人防跌落系统 第5部分：带有自动关闭和自动锁门的连接器

英文名称：Personal fall-arrest systems — Part 5: Connectors with self-closing and self-locking gates

发布日期：2001-12

标准范围

ISO 10333的本部分规定了要求、试验方法、使用和维护说明、标记、，适用于带有金属材料制成的自闭和自锁门的连接器的标签和包装材料。连接器用于个人防坠落系统（PFAS），该系统将在未来的国际标准中规定（参见参考书目中的ISO 10333-6），这样，如果发生制动，制动力将不超过6kN。ISO 10333的本部分仅适用于总质量不超过100kg的单人使用连接器。.注:建议总质量（包括工具和设备）超过100 kg的坠落防护设备使用者设备制造商关于该设备适用性的建议，可能需要额外测试。ISO 10333本部分的范围不包括:a） 附件元件、紧固带扣、调节带扣和其他金属配件，用于制造ISO 10333-6中规定的全身安全带；b） 用于提升材料的连接器；c） 特殊技术或情况下使用的连接器，例如救援或绳索通道。ISO 10333的本部分未规定连接器安装时适用的附加要求受到特殊使用条件的限制（例如，在访问工作地点和/或特定环境因素）。因此，需要进行处理，以确保材料的耐久性施工（如热处理、防腐处理、物理和化学危害防护）ISO 10333本部分未规定，但应符合适当的国际标准，否则，符合涉及相关物理特性和/或设备安全的国家标准和其他规范用户。尤其是，当认为有必要测试设备金属部件的耐腐蚀性时设备，应参考ISO 9227。

This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking,labelling and packaging, as appropriate, for connectors with self-closing and self-locking gates made from metallicmaterials.Connectors are used in personal fall-arrest systems (PFAS), which will be specified in a future International Standard(see ISO 10333-6 in the Bibliography), such that, if an arrest takes place, the arresting force will not exceed 6kN.This part of ISO 10333 is applicable only to connectors limited to single person use of a total mass not exceeding 100kg..NOTE Users of fall protection equipment whose total mass (including tools and equipment) exceeds 100 kg are advised to seekadvice from the equipment manufacturer regarding the suitability of this equipment, which may need additional testing.The scope of this part of ISO 10333 does not extend to:a) attachment elements, fastening buckles, adjusting buckles and other metallic fittings used in the manufacture offull-body harnesses, which are specified in ISO 10333-6;b) connectors used for material-lifting purposes;c) connectors used in special techniques or situations, e.g. rescue, or rope access.This part of ISO 10333 does not specify those additional requirements that would apply when connectors aresubjected to special conditions of use (where, for example, there exist unusual limitations concerning access to theplace of work and/or particular environmental factors). Thus, treatments to ensure the durability of the materials ofconstruction (such as heat treatment, anti-corrosion treatment, protection against physical and chemical hazards)are not specified in this part of ISO 10333, but should comply with appropriate International Standards or, failing that,with national standards and other specifications dealing with relevant physical characteristics and/or the safety ofusers. In particular, when it is considered necessary to test the corrosion resistance of metallic parts of theequipment, reference should be made to ISO 9227.

标准预览图