ISO 14713-1:2009 锌镀层 结构中铁和钢的防腐蚀指南与建议 第1部分：设计和抗腐蚀的一般原则

标准编号：ISO 14713-1:2009

中文名称：锌镀层 结构中铁和钢的防腐蚀指南与建议 第1部分：设计和抗腐蚀的一般原则

英文名称：Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance

发布日期：2009-12

标准范围

ISO 14713-1:20 09提供了关于一般设计原则的指南和建议，这些原则适用于要镀锌以进行腐蚀保护的制品，以及由应用于暴露于各种环境的铁或钢制品上的锌涂层提供的耐腐蚀性水平。初始保护涵盖以下方面可用的标准流程，设计考虑因素，以及使用环境。ISO 14713-1:20 09适用于通过以下工艺施加的锌涂层:热浸镀锌涂层（制造后施加）；热浸镀锌涂层(施加到连续板上)；sherardized涂层；热喷涂涂层；机械电镀涂层；电沉积涂层。这些指南和建议不涉及镀锌钢在役腐蚀保护的维护。有关该主题的指南可在ISO 12944-5和ISO 12944-8中找到。

ISO 14713-1:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the level of corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of environments. Initial protection is covered in relation to

• available standard processes,
• design considerations, and
• environments for use.

ISO 14713-1:2009 applies to zinc coatings applied by the following processes:

1. hot dip galvanized coatings (applied after fabrication);
2. hot dip galvanized coatings (applied onto continuous sheet);
3. sherardized coatings;
4. thermal sprayed coatings;
5. mechanically plated coatings;
6. electrodeposited coatings.

These guidelines and recommendations do not deal with the maintenance of corrosion protection in service for steel with zinc coatings. Guidance on this subject can be found in ISO 12944-5 and ISO 12944-8.

标准预览图