ISO 3506-3:2009 耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉及类似不受拉伸应力影响的紧固件

标准编号：ISO 3506-3:2009

中文名称：耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉及类似不受拉伸应力影响的紧固件

英文名称：Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

发布日期：2009-11

标准范围

ISO 3506-3:20 09规定了由奥氏体不锈钢制成的固定螺钉和类似紧固件在10°C至35°C的环境温度范围内测试时的机械性能。在较高或较低的温度下，性能会有所不同。ISO 3506-3:20 09适用于固定螺钉和类似紧固件:-公称螺纹直径1.6 mm≤d≤24mm；-直径和螺距符合ISO 68-1、ISO 261和ISO 262的三角形ISO公制螺纹；-任何形状。它不适用于具有特殊性能的螺钉，如可焊性。

ISO 3506-3:2009 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.ISO 3506-3:2009 applies to set screws and similar fasteners:- with nominal thread diameter 1,6 mm ≤ d ≤ 24 mm;- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262;- of any shape.It does not apply to screws with special properties, such as weldability.

标准预览图