ISO 16004:2005 飞机地面设备 乘客登机桥或移动交通工具-与飞机对接的仓门接口要求

标准编号：ISO 16004:2005

中文名称：飞机地面设备 乘客登机桥或移动交通工具-与飞机对接的仓门接口要求

英文名称：Aircraft ground equipment — Passenger boarding bridge or transfer vehicle — Requirements for interface with aircraft doors

发布日期：2005-04

标准范围

ISO 16004:2005规定了适用于下列民用运输机类型的乘客登机桥或乘客转运车辆的飞机配合部分的尺寸接口和无障碍空间要求。这些类型的飞机的门槛高度高于地面2.0米（80英寸）。较低的飞机通常不需要这种进入方式，并且没有被考虑在内。汇编了数据，并检查了最常用民用运输机类型（即具有相同机身设计和相同通用型号标志的飞机子类型系列，其中可能包括具有相同机身的任何未来衍生飞机）上此类物品的确切位置。这些类型包括:空中客车工业:A300/A310/A318/A319/A320/A321/A330/A340波音商用飞机:B717/B727/B737/B747/B757/B767/B777洛克希德飞机:L1011麦道:DC9/DC10/MD11/MD80/MD90ISO 16004:2005的意图不是规定任何适用于飞机设计的要求。具有新机身的未来飞机类型应满足ISO 7718关于与乘客登机桥或乘客转运车辆接口的主甲板乘客门要求，这将确保它们与满足ISO 16004:2005要求的乘客登机桥或乘客转运车辆的飞机配合部分兼容。

ISO 16004:2005 specifies dimensional interface and unobstructed space requirements applicable to the aircraft mating section of either passenger boarding bridges or passenger transfer vehicles used at airports for boarding and disembarkation of passengers on the types of civil transport aircraft listed below. These types of aircraft have a door sill height greater than 2,0 m (80 in) above the ground. Lower aircraft usually do not require such means of access, and have not been taken into account.Data was compiled and checked as to the exact location of such items on the most frequently used civil transport aircraft types (i.e. families of aircraft sub-types with the same fuselage design and the same general type designator, which potentially includes any future derivative aircraft with the same fuselage). These types include the following:

• AIRBUS INDUSTRIE: A300 / A310 / A318 / A319 / A320 / A321 / A330 / A340
• BOEING COMMERCIAL AIRPLANE: B717 / B727 / B737 / B747 / B757 / B767 / B777
• LOCKHEED AIRCRAFT: L1011
• McDONNELL DOUGLAS: DC9 / DC10 / MD11 / MD80 / MD90

It is not the intent of ISO 16004:2005 to specify any requirements applicable to aircraft design. Future aircraft types with a new fuselage should meet the main deck passenger doors requirements for interface with passenger boarding bridges or passenger transfer vehicles of ISO 7718, which would ensure their compatibility with the aircraft mating section of passenger boarding bridges or passenger transfer vehicles meeting the requirements of ISO 16004:2005.

标准预览图