ISO/IEC 18000-3:2008 信息技术 项目管理的射频识别 第3部分：13.56MHz空中接口通信参数

标准编号：ISO/IEC 18000-3:2008

中文名称：信息技术 项目管理的射频识别 第3部分：13.56MHz空中接口通信参数

英文名称：Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz

发布日期：2008-09

标准范围

已经开发了ISO/IEC 18000，以提供一个框架来定义用于射频识别（RFID）的国际可用频率的通用通信协议，并且在可能的情况下，确定用于所有频率的相同协议的使用，使得从一个频率迁移到另一个频率的问题被减少；最大限度地降低软件和实施成本；并使系统管理和控制以及信息交换尽可能通用。根据ISO/IEC 18000-1中确定的要求制备ISO/IEC 18000-3:20 08。ISO/IEC 18000-1解释了ISO/IEC 18000-3:20 08背后的概念。ISO/IEC 18000-3:20 08有两种操作模式，旨在解决不同的应用。总结了模式特征之间的差异。参数表中显示了模式之间的详细技术差异。ISO/IEC 18000-3:20 08仅涉及工作在13.56 MHz的系统。ISO/IEC 18000-3:20 08根据ISO/IEC 18000-1的要求，为用于在13.56 MHz下工作的物品识别的RFID系统提供物理层、冲突管理系统和协议值。ISO/IEC 18000-3:20 08为ISO/IEC 18000-3:20 08中确定的每种模式的系统提供了定义。ISO/IEC 18000-3:20 08定义了两种非干扰模式。这些模式不可互操作。这些模式虽然不能互操作，但却是互不干扰的。

ISO/IEC 18000 has been developed to provide a framework to define common communications protocols for Internationally useable frequencies for Radio Frequency Identification (RFID), and, where possible, to determine the use of the same protocols for all frequencies such that the problems of migrating from one to another are diminished; to minimize software and implementation costs; and to enable system management and control and information exchange to be common as far as is possible.ISO/IEC 18000-3:2008 was prepared in accordance with the requirements determined in ISO/IEC 18000-1. ISO/IEC 18000-1 provides explanation of the concepts behind ISO/IEC 18000-3:2008.ISO/IEC 18000-3:2008 has 2 MODES of operation, intended to address different applications. It summarizes the differences between MODE characteristics. The detailed technical differences between the modes are shown in the parameter tables.ISO/IEC 18000-3:2008 relates solely to systems operating at 13,56 MHz.ISO/IEC 18000-3:2008 provides physical layer, collision management system and protocol values for RFID systems for Item Identification operating at 13,56 MHz in accordance with the requirements of ISO/IEC 18000-1.ISO/IEC 18000-3:2008 provides definitions for systems for each MODE determined in ISO/IEC 18000-3:2008.ISO/IEC 18000-3:2008 defines two non-interfering MODES.

• The MODES are not interoperable.
• The MODES, whilst not interoperable, are non-interfering.

标准预览图