ISO 8132:2006 液压传动 160巴（16MPa）和250巴（25MPa）系列的单杆液压缸 辅助设备安装尺寸

标准编号：ISO 8132:2006

中文名称：液压传动 160巴（16MPa）和250巴（25MPa）系列的单杆液压缸 辅助设备安装尺寸

英文名称：Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series — Mounting dimensions for accessories

发布日期：2006-01

标准范围

ISO 8132:2006根据ISO 6020-1规定了16MPa（160巴）中型系列气缸和ISO 6022规定的25MPa（250巴）系列气缸配件互换性所需的安装尺寸。附件专门设计用于按照ISO 6020-1和ISO 6022制造的气缸，但这并不限制其应用。ISO 8132:2006涵盖了根据ISO 6099确定的以下附件:AP:内螺纹杆U形夹；AF 3:圆形杆法兰；AB 4:U形夹支架，直；AB 3:U形夹支架，角度；4:耳轴支架；AA 8:枢轴销，滑动或球面轴承（开口销或卡环型）；AP 6:杆眼球形内螺纹；AP 4:杆眼普通内螺纹。这些附件用于液压缸，以机械方式传递缸力。根据ISO 3320和ISO 3322的规定，这些附件的设计基于气缸内径和压力产生的最大力。ISO 8132:2006仅适用于按照本国际标准制造的产品的尺寸标准；它不适用于它们的功能特性。

ISO 8132:2006 lays down the mounting dimensions required for the interchangeability of accessories for the 16 MPa (160 bar) medium series cylinders in accordance with ISO 6020-1 and for the 25 MPa (250 bar) series cylinders in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-1 and ISO 6022, but this does not limit their application.ISO 8132:2006 covers the following accessories, identified in accordance with ISO 6099: AP: rod clevis, female thread; AF 3: rod flange, circular; AB 4: clevis bracket, straight; AB 3: clevis bracket, in angle; AT 4: trunnion bracket; AA 8: pivot pin, plain or spherical bearing (cotter pin or snap ring type); AP 6: rod eye spherical, female thread; AP 4: rod eye plain, female thread.These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322.ISO 8132:2006 applies only to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.

标准预览图