ISO 52016-1:2017 建筑物能效的加热 加热和冷却、内部温度和智能与和潜在热负荷的能源要求 第1部分：计算程序

标准编号：ISO 52016-1:2017

中文名称：建筑物能效的加热 加热和冷却、内部温度和智能与和潜在热负荷的能源要求 第1部分：计算程序

英文名称：Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 1: Calculation procedures

发布日期：2017-06

标准范围

ISO 52016-1:2017规定了评估以下各项的计算方法:a） 根据每小时或每月的计算，供暖和制冷的（合理）能源需求；b） 基于每小时或每月计算的（去）加湿的潜在能量需求；c） 基于每小时计算的内部温度；d） 基于每小时计算的显热负荷和冷负荷；e） 基于每小时计算的（去）加湿的湿度和潜热负荷；f） 每小时计算一次的设计显热负荷或冷负荷以及设计潜热负荷；g） 提供必要加湿和除湿的送风条件。计算方法可用于住宅或非住宅建筑，或其一部分，称为“建筑物”或“评估对象”。ISO 52016-1:2017还包含建筑物或建筑物部分热区评估的规范。计算按热区进行。在计算中，热区可以假定为热耦合或非热耦合。计算方法用于计算基本能源负荷和需求，不与特定技术建筑系统相互作用，以及计算系统特定能源负荷和需求，包括与特定系统的相互作用。每小时计算程序也可作为更广泛系统控制选项计算的基础。ISO 52016-1:2017适用于设计阶段的建筑、施工后的新建筑和使用阶段的现有建筑。注:引言中的表1显示了ISO 52016-1:2017在ISO 52000-1规定的模块化结构背景下在EPB标准集内的相对位置。

ISO 52016-1:2017 specifies calculation methods for the assessment of:a) the (sensible) energy need for heating and cooling, based on hourly or monthly calculations;b) the latent energy need for (de-)humidification, based on hourly or monthly calculations;c) the internal temperature, based on hourly calculations;d) the sensible heating and cooling load, based on hourly calculations;e) the moisture and latent heat load for (de-)humidification, based on hourly calculations;f) the design sensible heating or cooling load and design latent heat load using an hourly calculation interval;g) the conditions of the supply air to provide the necessary humidification and dehumidification.The calculation methods can be used for residential or non-residential buildings, or a part of it, referred to as "the building" or the "assessed object".ISO 52016-1:2017 also contains specifications for the assessment of thermal zones in the building or in the part of a building. The calculations are performed per thermal zone. In the calculations, the thermal zones can be assumed to be thermally coupled or not.The calculation methods have been developed for the calculation of the basic energy loads and needs, without interaction with specific technical building systems, and for the calculation of the system specific energy loads and needs, including the interaction with specific systems. The hourly calculation procedures can also be used as basis for calculations with more extensive system control options.ISO 52016-1:2017 is applicable to buildings at the design stage, to new buildings after construction and to existing buildings in the use phase.NOTE Table 1 in the Introduction shows the relative position of ISO 52016-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

标准预览图