ISO 8986-1:2009 塑料 聚丁烯-1（PB-1）模塑和挤塑材料 第1部分：命名系统及规范基础

标准编号：ISO 8986-1:2009

中文名称：塑料 聚丁烯-1（PB-1）模塑和挤塑材料 第1部分：命名系统及规范基础

英文名称：Plastics — Polybutene-1 (PB-1) moulding and extrusion materials — Part 1: Designation system and basis for specifications

发布日期：2009-11

标准范围

ISO 8986-1:2009建立了聚丁烯-1（PB-1）热塑性材料的命名体系，可作为规范的基础。聚丁烯塑料的类型通过一个分类系统相互区分，该分类系统基于指定性能熔体体积流速的适当水平，以及关于基本聚合物参数、预期应用和/或加工方法、重要性能、添加剂、着色剂、填料和补强材料的信息。ISO 8986-1适用于所有丁烯均聚物和丁烯共聚物，其他1？烯烃单体的最大质量含量小于50%，且非-官能团最大质量分数为1%的烯烃单体。它适用于粉末、颗粒或颗粒形式的正常使用材料，以及未改性或未经着色剂、添加剂、填料等改性的材料。

ISO 8986-1:2009 establishes a system of designation for polybutene？1 (PB？1) thermoplastic materials which may be used as the basis for specifications.The types of polybutene plastics are differentiated from each other by a classification system based on appropriate levels of the designatory property melt volume-flow rate and on information about basic polymer parameters, intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials.ISO 8986-1 is applicable to all butene homopolymers and to copolymers of butene with a maximum content of other 1？olefinic monomers of less than 50 % by mass and with a content of non-olefinic monomers with functional groups up to a maximum of 1 % by mass.It applies to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.

标准预览图