ISO 10865-1:2012 为坐着和站立乘客使用而设计的无障碍运输车辆的轮椅约束和乘员固定系统 第1部分：面向后的轮椅乘客用系统

标准编号：ISO 10865-1:2012

中文名称：为坐着和站立乘客使用而设计的无障碍运输车辆的轮椅约束和乘员固定系统 第1部分：面向后的轮椅乘客用系统

英文名称：Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 1: Systems for rearward-facing wheelchair-seated

发布日期：2012-06

标准范围

ISO 10865-1:2012适用于轮椅乘客空间（RF？WPS），当乘坐无障碍交通工具时，面向后的轮椅乘客使用，其体重大于22 kg。它适用于主要用于固定路线服务的车辆在正常和紧急驾驶条件下运行时使用的系统，乘客可以坐着和站着行驶。ISO 10865-1:2012规定了设计和性能要求及相关试验方法、制造商说明和对安装人员和用户的警告要求、产品标签和试验信息披露要求。ISO 10865-1:2012的主要目的是限制后向轮椅（包括带三个或三个以上车轮的滑板车）的移动，这可能会导致与车辆内部的危险接触或对其他乘客造成伤害。

ISO 10865-1:2012 is applicable to wheelchair passenger spaces (RF？WPSs) intended for use by rearward-facing wheelchair-seated occupants, with a body mass greater than 22 kg, when travelling in accessible transport vehicles. It is applicable to systems for use in vehicles used mainly on fixed route services when operated under normal and emergency driving conditions, where passengers are allowed to travel both sitting and standing.ISO 10865-1:2012 specifies design and performance requirements and associated test methods, requirements for manufacturer instructions and warnings to installers and users, requirements for product labelling and disclosure of test information.The primary purpose of ISO 10865-1:2012 is to limit those movements of a rearward-facing wheelchair, including scooters with three or more wheels, that might result in hazardous contact with the vehicle interior or injury to other passengers.

标准预览图