ISO 13680:2020 石油和天然气工业 套管、油管和管线用抗腐蚀性合金无缝管材 技术交付条件
标准编号：ISO 13680:2020
中文名称：石油和天然气工业 套管、油管和管线用抗腐蚀性合金无缝管材 技术交付条件
英文名称：Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
发布日期：2020-05
标准范围
本文件规定了两个产品规格等级的套管、油管、联轴节库存和附件材料（包括联轴节库存和棒材的附件材料）用耐蚀合金无缝管产品的交货技术条件:-PSL-1是本文件的基础；-PSL-2，它为在附录G和ISO 15156系列中规定的环境和鉴定方法下既耐腐蚀又耐开裂的产品提供了附加要求。根据制造商的选择，可以提供PSL-2产品代替PSL-1。注1:本文件中包含的耐腐蚀合金是符合ISO 4948-1和ISO 4948-2的特殊合金。注2:就本文件而言，NACE MR0175等同于ISO 15156系列。注3:附件产品可由联轴器材料和管材制成，或由实心棒材制成，或由附件F中所述的钻孔和热处理棒材制成。本文件不包含与单根管道连接有关的规定。本文件包含螺纹后油管和套管标记的相关规定。本文件适用于以下五组产品:a） 第1组，由具有马氏体或马氏体/铁素体结构的不锈钢合金组成；b） 第2组，由铁素体-奥氏体结构的不锈钢合金组成，如双相和超双相不锈钢合金；c） 第3组，由奥氏体结构（铁基）的不锈钢合金组成；d） 第4组，由镍组成-奥氏体结构的镍基合金（镍基）；e） 第5组，仅由奥氏体结构的时效硬化（AH）镍基合金中的棒材（附录F）组成。注4:并非所有PSL-1类别和等级都能根据ISO 15156系列进行抗裂，因此不包括在PSL-2中。
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:— PSL-1, which is the basis of this document;— PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.NOTE 1 The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.NOTE 2 For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.NOTE 3 Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.This document contains no provisions relating to the connection of individual lengths of pipe.This document contains provisions relating to marking of tubing and casing after threading.This document is applicable to the following five groups of products:a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.NOTE 4 Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.
标准预览图
