ISO 13363:2004 舰队 引擎排湿系统用橡胶和塑料水管 规格
标准编号：ISO 13363:2004
中文名称：舰队 引擎排湿系统用橡胶和塑料水管 规格
英文名称：Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification
发布日期：2004-02
标准范围
ISO 13363:2004规定了三种类型和两类软管的要求。软管旨在用于船用发动机湿式排气系统（废气与冷却水混合）。该标准不适用于舷外马达/个人水上船只。这三种类型是:类型1:软壁软管，由耐油材料制成，带有合成纤维增强件；类型2:硬壁软管，由耐油材料制成，带有合成纤维增强件，其中嵌入有螺旋线；类型3:软管或管（柔性连接器），由耐油材料制成，带或不带加强件或盖，旨在短长度用于连接器免受机械损坏的位置。这两个类是:A级用于柴油发动机；B级适用于汽油发动机和排气温度非常高的柴油发动机。
ISO 13363:2004 specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). The standard does not apply to outboard-motor/personal water craft.The three types are:
- type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement;
- type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with an helical wire embedded in it;
- type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage.
- class A intended for diesel engines;
- class B intended for petrol engines, and for diesel engines with a very high exhaust temperature.
标准预览图
