ISO 13680:2024 包括低碳能源在内的石油和天然气工业 用作套管、油管、接箍和附件材料的耐腐蚀合金无缝产品 交货技术条件
标准编号：ISO 13680:2024
中文名称：包括低碳能源在内的石油和天然气工业 用作套管、油管、接箍和附件材料的耐腐蚀合金无缝产品 交货技术条件
英文名称：Oil and gas industries including lower carbon energy — Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions
发布日期：2024-05
标准范围
本文件规定了两个产品规格等级的套管、油管、联轴器坯料和附件材料（包括棒材的联轴器坯料和附件材料）用耐腐蚀合金无缝产品的交货技术条件:PSL-1，这是本文件的基础；PSL-2，针对附件中规定的环境和鉴定方法，对预期同时耐腐蚀和抗裂的产品提供了附加要求？G和在ISO中？15156系列还是NACE？MR0175.本文件不包含与单段管道连接相关的规定。符合ISO的证明？15156-3:2020还是出生？MR0175-2021受端部尺寸、连接制造或焊接操作影响的材料超出了本文件的范围。本文件包含有关穿线后油管和套管标记的规定。本文件适用于以下五组产品:A）？团体？1，其由具有马氏体或马氏体/铁素体结构的不锈钢合金组成；b）？团体？2，其由具有铁素体-奥氏体组织的不锈钢合金组成，如双相和超双相不锈钢合金；c）？团体？3，其由具有奥氏体结构的不锈钢合金（铁基）组成；d）？团体？4，其由具有奥氏体结构的镍基合金（镍基）组成；e）？第5组，仅由棒材组成（附录？F）在具有奥氏体结构的时效硬化（AH）镍基合金中。
This document specifies the technical delivery conditions for corrosion-resistant alloy seamless products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
PSL-1, which is the basis of this document;
PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series or NACE MR0175.
This document contains no provisions relating to the connection of individual lengths of pipe. Demonstration of conformance to ISO 15156-3:2020 or NACE MR0175-2021 of material affected by end sizing, connection manufacture or welding operations is outside the scope of this document.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a) group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b) group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c) group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d) group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e) group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
标准预览图
