ISO 16030:2022 气动液压 连接 端口和螺柱端

标准编号：ISO 16030:2022

中文名称：气动液压 连接 端口和螺柱端

英文名称：Pneumatic fluid power — Connections — Ports and stud ends

发布日期：2022-07

标准范围

本文件规定了气动流体动力应用的平行螺纹（G系列螺纹）端口和螺柱端的尺寸和性能要求。它规定了可重复使用、积极保留的密封件，用于无泄漏连接，用于0.09兆帕（±0.9巴）至1.6兆帕（16巴）。本文件适用于气动流体动力应用中新设计中规定的螺纹端口和螺柱端。警告？-符合本文件要求的端口和螺柱端部不得与符合ISO1179（所有零件）或螺纹符合ISO7-1.如图所示1，ISO16030要求和ISO1179-1（Δ1和Δ2），使端口和螺柱端部符合ISO7-1不合适。

This document specifies dimensions and performance requirements for ports and stud ends with parallel threads (G series thread) for pneumatic fluid power applications.It specifies reusable, positively retained seals for leak-free connections, for use at pressures from？0,09 MPa (？0,9 bar) up to 1,6 MPa (16 bar).This document is applicable for threaded ports and stud ends specified in new designs in pneumatic fluid power applications.WARNING — Ports and stud ends conforming to this document are not intended to connect with ports and stud ends that conform to ISO 1179 (all parts) or threads that conform to ISO 7-1.As shown in Figure 1, significant differences in thread depth exists between ISO 16030 requirement and ISO 1179-1 (Δ1 and Δ2) that makes ports and stud ends conforming to ISO 7-1 unsuitable.

标准预览图