ISO 9445-1:2009 连续冷轧不锈钢 尺寸和形状公差 第1部分：窄带材和切割长度

标准编号：ISO 9445-1:2009

中文名称：连续冷轧不锈钢 尺寸和形状公差 第1部分：窄带材和切割长度

英文名称：Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths

发布日期：2009-03

标准范围

ISO 9445-1:2009规定了厚度小于等于3 mm且轧制宽度小于600 mm的连续冷轧不锈钢窄带的尺寸和形状公差。它也适用于从此类带材上取下的切割长度。ISO 9445-2涵盖了宽度小于600 mm的窄带和切割长度，这些窄带和切割长度是通过纵向纵切由宽带制成的。

ISO 9445-1:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.Narrow strip and cut lengths with widths of less than 600 mm, which are manufactured from wide strip by longitudinal slitting, are covered in ISO 9445-2.

标准预览图