ISO 888:1976 螺栓.螺钉和双头螺柱.公称长度及一般用途的螺栓螺纹长度

标准编号：ISO 888:1976

中文名称：螺栓.螺钉和双头螺柱.公称长度及一般用途的螺栓螺纹长度

英文名称：Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts

发布日期：1976-05

标准范围

指定从2 mm到300 mm（含）以及从1/16英寸到12英寸（含）的标称长度。；以毫米和英寸为单位给出螺纹长度/直径的协调。

Specifies the nominal lengths from 2 mm up to and including 300 mm as well as from 1/16 inch up to and including 12 inch resp.; gives the coordination for thread lengths/diameters for the dimensions in millimeters and inches.

标准预览图