ISO/TS 18226:2006 塑料管材和管件.压力4 MPa（40 bar）的供气体燃料用加固热塑管道系统

标准编号：ISO/TS 18226:2006

中文名称：塑料管材和管件.压力4 MPa（40 bar）的供气体燃料用加固热塑管道系统

英文名称：Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)

发布日期：2006-10

标准范围

ISO/TS 18226:2006描述了使用增强热塑性塑料管（RTP）系统传输气体燃料，最大工作压力不超过40巴，工作温度为-50°C至120°C，具体取决于内衬和覆盖材料。ISO/TS 18226:2006涉及通过将清管操作仅限于软清管来限制衬套磨损和损坏的传输系统。ISO/TS 18226:2006中的建议仅限于RTP及其相关的在线配件和端部配件。如果其他系统部件（弯头、三通、阀门等）为传统结构，则它们将受现有标准和实践规范的约束。ISO/TS 18226:2006规定了RTP系统的鉴定测试程序。它还提供了重新确认设计依据的程序，可用于设计、材料或制造工艺发生变更的产品变体。

ISO/TS 18226:2006 describes the use of reinforced thermoplastics pipe (RTP) systems for transmission of gaseous fuels at maximum operating pressures up to and including 40 bars, and service temperatures in the region - 50 °C to 120 °C, depending on the liner and cover materials.ISO/TS 18226:2006 relates to transmission systems in which wear and damage to the liner are restricted by limiting pigging operations to soft pigging only.The recommendations in ISO/TS 18226:2006 are confined to RTP and its associated in-line fittings and end-fittings. Where the other system components (elbows, tees, valves, etc.) are of conventional construction, they will be governed by existing standards and codes of practice.ISO/TS 18226:2006 specifies a qualification testing procedure for RTP systems. It also provides a procedure for reconfirmation of the design basis that may be used for product variants where changes have been made in design, materials or the manufacturing process.

标准预览图