ISO 8779:2020 塑料管道系统 灌溉用聚乙烯（PE）管 规范

标准编号：ISO 8779:2020

中文名称：塑料管道系统 灌溉用聚乙烯（PE）管 规范

英文名称：Plastics piping systems — Polyethylene (PE) pipes for irrigation — Specifications

发布日期：2020-08

标准范围

本文件规定了由聚乙烯（PE）制成的管道（干管、副干管和支管）的特性，用于在水温高达45°C时输送灌溉用水。注1:关于水温对最大工作压力的影响，见附录A。本文件适用于不会长期承受内部压力且每年不超过1500小时的管道。对于具有长期连续压力的管道应用，ISO 4427系列适用。注2:本文件涵盖的管道预期寿命为10年或更短。本文件还规定了材料的特性及其所指试验方法的参数。

This document specifies the characteristics of pipes (mains, sub-mains and laterals) made from polyethylene (PE), intended for the conveyance of water for irrigation, at a water temperature up to 45 °C.NOTE 1 For the effect of water temperature on the maximum operating pressure, see Annex A.This document applies to pipes that will not be subjected to internal pressure for long periods, and not more than 1 500 hours/year. For piping applications with long-term continuous pressure, the ISO 4427 series applies.NOTE 2 The expected lifetime of pipes covered by this document is ten years or less.This document also specifies the properties of the material and the parameters for the test methods to which it refers.

标准预览图